Australian Owned for 100 years in 2016
freecall
1800 623 350
Australia wide
 

Power Factor Correction

VCL Series UPS

10kVAR Wall Mount

Compact Power Factor Correction unit which saves money by elimination of KVAr demand charges

  • Automatically corrects low Power Factor
  • High Resolution fine digital steps
  • Intelligent software control
  • 3 CTs provide independent phase control
  • Ideal for sites with unbalanced single phase loads
  • Rapid Commissioning with Digital Controller
  • High Reliability Aluminium Self-Healing AC Capacitors
  • Zero Crossing Semiconductor pre-charge to eliminate
    • High Current Surges
    • EMI Electrical Noise
    • Destructive Capacitor Currents
  • Reduces Harmonics and protects Capacitors
  • EMI Electrical Noise Suppression Networks
  • Approval Mark : RCM Mark
  • Line Surge protected - IEC 61000-4-5 to 10KV/40KA
  • Compliance to AS/NZS 3100:2009 + A1 + A2 + A3
  • Lockable Robust Housing
  • AFLC Ripple Signal Selectable K22
  • Comms Option LAN, WiFi, 3G, 4G
10kVAR Wall Mount Brochure
25-50kVAR Floor Mount

25-50kVAR Floor Mount

  • 50 KVAR Modules stackable with Controller
  • Semiconductor switching for fast response <250ms
  • High Reliability Aluminium Self-Healing AC Capacitors
  • Digital Capacitor array for High Resolution PF tracking
  • Eliminate or Reduce “Demand Charge”
  • 50-200 KVAr in 50KVAR Modules with Controller
  • Automatically corrects low Power Factor “real-time”
  • Intelligent software control
  • Power Electronic Modules
  • Harmonics protected
  • EMI Electrical Noise Suppression Networks
  • EMC – C-tick
  • Line Surge protected - IEC 61000-4-5 to 10KV/40KA
  • Approval Mark : RCM Mark
  • Compliance to AS/NZS 60335.1:2011 + A1 +A2
  • Module Control over RS485 UART
  • AFLC Ripple Signal compatible K22
25-50kVAR Floor Mount Brochure
VH Series UPS

50-200kVAR Modular

  • Standard 19 Inch Rack with 50KVAR stackable Modules
  • Semiconductor switching for fast response <250ms
  • High Reliability Aluminium Self-Healing AC Capacitors
  • Digital Capacitor array for High Resolution PF tracking
  • Single Flexible Utility Grade snap-on Rogowski CT
  • 50-100 KVAr in 50KVAR Modules –Half Rack
  • 50-200 KVAr in 50KVAR Modules – Full Rack
  • Automatically corrects low Power Factor “Real-time”
  • Intelligent software control
  • Power Electronic Modules
  • Harmonics protected
  • EMI Electrical Noise Suppression Networks
  • Approval Mark : RCM Mark
  • Line Surge protected - IEC 61000-4-5 to 10KV/40KA
  • Compliant to AS/NZS 60335.1:2011 + A1 – A2
  • Power Quality Data Monitoring, Control, Alarms over Internet, USB, RS485 (optional), Ethernet/LAN
  • AFLC Ripple Signal Compatible K22
50-200kVAR Modular Brochure
Copyright 2011 © Power Parameters Pty Ltd | Ph: 1800 623 350 | Fx: 1800 067 263 | power@parameters.com.au
Further information may be found at suppliers website